₹4,850.00 (excluding GST)
Are you want to be an Electronic Geek in the future and want to build your own drone then this Flight controller is best for you. The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to the Electronic Speed Controllers (ESC's), which translates this desired speed into a signal that the motors can understand. This flight controller.APM 2.8 Multicopter Flight Controller is an upgraded version of 2.5 and 2.6 with a Built-in Compass for FPV RC Drone. The sensors are exactly the same as the APM 2.6 flight controller. However, the module has the option to use the built-in compass an external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers
₹9,736.00 (excluding GST)
This high-quality flight controller, designed specifically for Fixed Wing UAV enthusiasts, is compatible with Betaflight, INAV, and Ardupilot. This controller is tailored to meet the needs of hobbyists who are passionate about model aviation, providing a reliable and efficient solution for their aircraft.
₹62,719.00 (excluding GST)
The Cube Orange Flight Controller is a professional-grade autopilot and flight control system widely used in advanced multirotor drones, industrial UAVs, fixed-wing platforms, and VTOL aircraft. It serves as the “brain” of a drone by managing attitude control, navigation, stabilization, and mission execution — and supports fully autonomous missions when paired with compatible firmware such as PX4 or ArduPilot.
₹3,180.00 (excluding GST)
Diatone Mamba F722S is based on the latest STM32F722 processor with a processing frequency of 216MHz, which means complete freedom in flight without many technical limitations.
₹2,150.00 (excluding GST)
The GEPRC GPS series product line has been fully upgraded. The GEP-M10 series of GPS products based on u-blox M10050 chip are now launched.The GEP-M10 series GPS positioning module uses u-blox’s M10 chip solution and supports GPS+BDS+Galileo+QZSS+SBAS joint positioning, up to 32 satellites. There are 12*12mm and 18*18mm ceramic antenna versions, providing better receiving ability. Built-in Flash chip and Farad capacitor can save configuration parameters and quickly hot start.
₹39,150.00 (excluding GST)
The Here3 GPS is a high precision GNSS system that supports RTK mode, built with CAN protocol. It is also designed to be dust-proof and splash-proof up to a certain limit. Equipped with STM32F302 processor, the Here3 provides faster processing speed and better reliability.
₹17,363.00 (excluding GST)
The Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates flight controller (FC) and on-screen display (OSD) in one. The Kakute F7’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.
₹21,188.00 (excluding GST)
This is a Holybro Pixhawk 6C Mini Flight Controller. The Pixhawk® 6C Mini is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It shares the same STMH743 microprocessor and sensors as the Pixhawk® 6C. Compared to the standard Pixhawk® 6C, this Mini version has a built-in PWM header, and some ports have been removed in order to fit this Mini form factor. Inside the Pixhawk® 6C Mini, you can find an STMicroelectronics®-based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications. The Pixhawk® 6C Mini's H7 microcontroller contains the Arm® Cortex®-M7 core running up to 480 MHz and has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.
₹38,686.00 (excluding GST)
The JIYI K++ V2 Flight Controller is a professional-grade autopilot and control system designed for multi-rotor UAVs (drones) with a special focus on agricultural spraying, precision missions, and industrial drone applications. It represents the next generation flagship controller from JIYI UAV, building on earlier systems with enhanced redundancy, sensor robustness, and processing power for reliable and autonomous flight performance.
₹36,902.00 (excluding GST)
The JIYI K3A Pro Flight Controller is a professional-grade autopilot and control system designed specifically for agricultural spraying drones, multi-rotor UAVs, and professional aerial platforms. It acts as the “brain” of the drone — managing motor control, navigation, stability, GPS routing, and spraying/drone mission features with high reliability and precision.
₹42,864.00 (excluding GST)
The JIYI KX Flight Controller is an advanced autopilot and control system designed for professional multi-rotor and industrial drones — including quadcopters, hexacopters, and larger octocopter platforms used in surveillance, mapping, emergency response, logistics, and other commercial applications. It combines reliable flight stabilization with versatile peripheral support to handle complex flight missions in a wide range of environments.
₹3,888.00 (excluding GST)
Experience unmatched control and performance with the BotStack F722 Flight Controller and 50A ESC Combo. Designed for drone enthusiasts, FPV racers, and freestyle pilots, this stack combines precision, power, and versatility in one compact package. Its innovative design ensures smooth handling, responsive maneuvers, and effortless connectivity with a wide range of drone components.
₹5,879.00 (excluding GST)
The most common question asked by our community is "what is flight controller" and the answer is here The flight controller (aka FC) is the brain of the Drone(Quadcopter). It's a circuit board with a range of sensors that detect movement of the drone, as well as user commands so Pixhawk 2.4.8 does. Using this data, it then controls the speed of the motors to make the craft move as instructed.
₹5,865.00 (excluding GST)
The Radiolink CrossFlight Flight Controller is a state-of-the-art device tailored for both beginners and seasoned drone enthusiasts. Engineered with precision and reliability in mind, this flight controller offers exceptional control and stability, making it ideal for a wide range of drone applications, from aerial photography to FPV racing. With its advanced gyroscopic sensors and flight algorithms, it provides accurate and responsive control, allowing pilots to execute precise maneuvers with ease. Featuring a sleek and compact design, the CrossFlight Flight Controller is easy to install and integrate into various drone platforms. Its compatibility with Radiolink transmitters and receivers ensures seamless connectivity, while its user-friendly interface simplifies setup and configuration.
₹4,047.00 (excluding GST)
You will get an STM32F405 FC (better than F411), onboard 4-level battery life indicator, 4GB Blackbox SD card slot for your flight logs, 4 groups of LED strip pads, complete with a DJI plug for your digital quad, and built-in Bluetooth for wireless configuration on the SpeedyBee app. Don't forget about the powerful 50A 4-in-1 ESC, built with TVS protective diode + Japan-made TDK SMT capacitors + external 1500uF low ESR capacitor, everything is for durable build and smooth flight.