₹16,000.00 (excluding GST)
The DJI Mavic 3 Classic Battery — officially called the Intelligent Flight Battery — is the removable rechargeable battery pack that powers your drone in flight. It’s designed specifically for the DJI Mavic 3 Classic, and is compatible with other DJI Mavic 3 series models (like original Mavic 3, Pro, etc.), giving you long flight times and reliable power delivery.
₹12,000.00 (excluding GST)
The DJI Mavic 3 Classic Charging Hub is a multi-battery charging station that lets you charge more than one Intelligent Flight Battery (the drone’s main batteries) using a single power source. It plugs into a compatible USB-C charger (such as DJI’s 65 W or 100 W adapters — not always included) and expands the charging interface so multiple batteries can be charged in sequence without swapping cables manually.
₹7,200.00 (excluding GST)
The front left arm for the DJI Mavic 3 Classic is a structural and mechanical component that attaches to the drone’s main body and supports the left-front motor and propeller. It plays a critical role in flight, as each arm holds a motor that generates lift and stabilizes the drone’s movement. When this arm gets damaged (for example, from a crash or hard landing), replacing it with an OEM or high-quality spare restores safe flight performance and balance.
₹7,200.00 (excluding GST)
The front arm (right) on the DJI Mavic 3 Classic is one of the four foldable arms that extend from the drone’s central body to support a motor and propeller. This part specifically refers to the right-side arm at the front of the aircraft. It is a critical structural and propulsion component used to replace a damaged arm after a crash or impact, restoring proper lift, balance, and directional control.
₹2,500.00 (excluding GST)
The front arm hinges (sometimes called arm shaft hinges, pivot pins, pivot axes, or hinge pins) are pivoting mechanical pins/shafts that connect the front arms of the drone to its main body frame. These hinges allow the arms to fold in and out smoothly and lock securely into the correct flight position. They are critical for the folding design of the drone and are small parts inside the arm joint that the arm rotates around.
₹8,000.00 (excluding GST)
The lower body (lower shell / bottom fuselage) of the DJI Mavic 3 Classic is the bottom structural housing of the drone. It forms the underside of the aircraft’s main body and, together with the upper body and middle frame, creates the complete fuselage that holds internal electronics, battery bay, wiring, and provides mounting points for the arms and landing gear. This part helps protect internal components and maintains the drone’s overall strength and aerodynamic shape
₹10,000.00 (excluding GST)
The middle body (middle frame) is the central structural section of the DJI Mavic 3 Classic airframe. It sits between the upper body (top shell) and the lower body (bottom shell) and forms the core chassis that supports and aligns all major internal components — including the arms, gimbal, flight controller, wiring harnesses, sensors, and battery mount. This part is essential for the drone’s rigidity, balance, and overall structural integrity.
₹4,000.00 (excluding GST)
The propellers for the DJI Mavic 3 Classic are foldable, two-blade rotor blades that attach to the drone’s motors to generate lift for flight. They come in matched pairs that include both clockwise (CW) and counter-clockwise (CCW) blades — this mirrored pairing is required for a balanced and stable quadcopter setup.
₹30,000.00 (excluding GST)
The DJI RC1 (often just called the DJI RC remote controller) is the standard smart controller with built-in display that DJI offers for many of its recent consumer drones — and it’s one of the compatible controllers you can use with the DJI Mavic 3 Classic Drone Camera.
₹7,000.00 (excluding GST)
The left rear arm assembly for the DJI Mavic 3 Classic is a drone structural and propulsion component that supports the rear-left motor and propeller. This assembly is essential for flight stability and balanced lift — it transfers motor torque into thrust and connects that motor to the drone’s central fuselage. If the arm is bent, cracked, or otherwise damaged (often from hard landings or crashes), replacing it restores flight performance and safety.
₹7,000.00 (excluding GST)
Perfect replacements replace your worn or damaged Mavic 3 CLASSIC drone parts.This drone motor arm is compatible with Mavic 3 CLASSIC quadcopter.High quality materials ensure its good performance, makes you enjoy your flying.Motor arm assembly repair parts for Mavic 3 CLASSIC
₹2,500.00 (excluding GST)
The rear hinge (also called a rear arm axis, pivot pin, or hinge shaft) for the DJI Mavic 3 Classic is a small but essential mechanical component that connects each rear arm to the drone’s main body and allows the arm to rotate, fold, and lock securely into the correct position before flight. This hinge enables the folding design of the drone — letting you pack the aircraft compactly and then unfold it for stable flight.
₹30,000.00 (excluding GST)
The DJI Mavic 3 Classic Smart Remote RC2 is a high‑performance remote controller designed to deliver a stable, intuitive, and professional flight experience when paired with the DJI Mavic 3 Classic drone. It combines robust signal transmission, rich telemetry, and ergonomic controls to give pilots confident command over their aircraft and camera systems.
₹6,000.00 (excluding GST)
The upper body (upper shell) is the top-cover structural housing of the DJI Mavic 3 Classic airframe. It’s essentially the top half of the drone’s fuselage that protects internal electronics, sensor systems, flight controller, battery slot surround, antenna mounts, and other components from damage while helping maintain the drone’s aerodynamic profile.