₹7,200.00 (excluding GST)
The front arm (right) on the DJI Mavic 3 Classic is one of the four foldable arms that extend from the drone’s central body to support a motor and propeller. This part specifically refers to the right-side arm at the front of the aircraft. It is a critical structural and propulsion component used to replace a damaged arm after a crash or impact, restoring proper lift, balance, and directional control.
₹2,500.00 (excluding GST)
The front arm hinges (sometimes called arm shaft hinges, pivot pins, pivot axes, or hinge pins) are pivoting mechanical pins/shafts that connect the front arms of the drone to its main body frame. These hinges allow the arms to fold in and out smoothly and lock securely into the correct flight position. They are critical for the folding design of the drone and are small parts inside the arm joint that the arm rotates around.
₹8,000.00 (excluding GST)
The lower body (lower shell / bottom fuselage) of the DJI Mavic 3 Classic is the bottom structural housing of the drone. It forms the underside of the aircraft’s main body and, together with the upper body and middle frame, creates the complete fuselage that holds internal electronics, battery bay, wiring, and provides mounting points for the arms and landing gear. This part helps protect internal components and maintains the drone’s overall strength and aerodynamic shape
₹10,000.00 (excluding GST)
The middle body (middle frame) is the central structural section of the DJI Mavic 3 Classic airframe. It sits between the upper body (top shell) and the lower body (bottom shell) and forms the core chassis that supports and aligns all major internal components — including the arms, gimbal, flight controller, wiring harnesses, sensors, and battery mount. This part is essential for the drone’s rigidity, balance, and overall structural integrity.
₹4,000.00 (excluding GST)
The propellers for the DJI Mavic 3 Classic are foldable, two-blade rotor blades that attach to the drone’s motors to generate lift for flight. They come in matched pairs that include both clockwise (CW) and counter-clockwise (CCW) blades — this mirrored pairing is required for a balanced and stable quadcopter setup.
₹30,000.00 (excluding GST)
The DJI RC1 (often just called the DJI RC remote controller) is the standard smart controller with built-in display that DJI offers for many of its recent consumer drones — and it’s one of the compatible controllers you can use with the DJI Mavic 3 Classic Drone Camera.
₹7,000.00 (excluding GST)
The left rear arm assembly for the DJI Mavic 3 Classic is a drone structural and propulsion component that supports the rear-left motor and propeller. This assembly is essential for flight stability and balanced lift — it transfers motor torque into thrust and connects that motor to the drone’s central fuselage. If the arm is bent, cracked, or otherwise damaged (often from hard landings or crashes), replacing it restores flight performance and safety.
₹7,000.00 (excluding GST)
Perfect replacements replace your worn or damaged Mavic 3 CLASSIC drone parts.This drone motor arm is compatible with Mavic 3 CLASSIC quadcopter.High quality materials ensure its good performance, makes you enjoy your flying.Motor arm assembly repair parts for Mavic 3 CLASSIC
₹2,500.00 (excluding GST)
The rear hinge (also called a rear arm axis, pivot pin, or hinge shaft) for the DJI Mavic 3 Classic is a small but essential mechanical component that connects each rear arm to the drone’s main body and allows the arm to rotate, fold, and lock securely into the correct position before flight. This hinge enables the folding design of the drone — letting you pack the aircraft compactly and then unfold it for stable flight.
₹30,000.00 (excluding GST)
The DJI Mavic 3 Classic Smart Remote RC2 is a high‑performance remote controller designed to deliver a stable, intuitive, and professional flight experience when paired with the DJI Mavic 3 Classic drone. It combines robust signal transmission, rich telemetry, and ergonomic controls to give pilots confident command over their aircraft and camera systems.
₹6,000.00 (excluding GST)
The upper body (upper shell) is the top-cover structural housing of the DJI Mavic 3 Classic airframe. It’s essentially the top half of the drone’s fuselage that protects internal electronics, sensor systems, flight controller, battery slot surround, antenna mounts, and other components from damage while helping maintain the drone’s aerodynamic profile.
₹10,000.00 (excluding GST)
Sequential Battery Charging: Insert up to three intelligent flight batteries and the hub will automatically detect and charge them in order from highest to lowest remaining power.USB Output: A built-in USB-A port (5 V, 2 A) lets you power or charge external devices such as a remote controller, smartphone, or tablet while batteries are charging (charger and cables typically not included).
₹7,000.00 (excluding GST)
The Li-Ion DJI Mini 3 Pro Battery is a high-performance rechargeable battery specifically designed for the DJI Mini 3 Pro drone. With a capacity of 2453 mAh, it provides extended flight time, allowing pilots to capture more aerial footage without interruption. Lightweight and compact, it maintains the drone’s portability while delivering stable power and reliable performance. Built with advanced Li-Ion cells, the battery ensures safety, long cycle life, and protection against overcharge, over-discharge, and short-circuit conditions. Ideal for aerial photography and videography, this battery maximizes flight efficiency and keeps your drone ready for every mission.
₹4,200.00 (excluding GST)
The DJI Mini 3 Pro Front Arm (Left) is an original replacement spare part designed to restore the structural integrity and flight performance of the DJI Mini 3 Pro drone. This front left arm supports the motor and propeller assembly, ensuring stable lift, smooth maneuverability, and proper balance during flight.
₹4,200.00 (excluding GST)
The DJI Mini 3 Pro Front Arm (Right) is a genuine replacement spare part designed to restore the structural strength and flight performance of the DJI Mini 3 Pro drone. This front right arm securely supports the motor and propeller assembly, playing a vital role in maintaining stable lift, smooth maneuverability, and proper balance during flight.
₹1,400.00 (excluding GST)
The DJI Mini 3 Pro Front Hinges (Right & Left) are replacement pivot components designed to restore the folding arm mechanism of the DJI Mini 3 Pro drone. These hinges serve as the pivot points where each front arm connects to the main body, allowing the arms to fold in for transport and unfold securely for flight.
₹3,000.00 (excluding GST)
The DJI Mini 3 Pro Lower Body is an OEM replacement structural component designed to restore the base housing of the DJI Mini 3 Pro drone. This important lower shell forms the bottom half of the aircraft’s main fuselage, providing a solid foundation that protects internal electronics, wiring harnesses, and sensor modules. It also integrates mounting points for the landing gear and battery bay.
₹7,500.00 (excluding GST)
The DJI Mini 3 Pro Middle Body is an OEM replacement structural frame component designed for the DJI Mini 3 Pro drone. This middle body section forms the central chassis of the aircraft, connecting the upper body and lower body shells while providing secure internal support for key electronics, wiring harnesses, sensors, and flight control modules.
₹1,000.00 (excluding GST)
The DJI Mini 3 Pro Propeller Set (CW & CCW) is an official replacement accessory engineered specifically for the DJI Mini 3 Pro drone. This set includes both Clockwise (CW) and Counter-Clockwise (CCW) propellers — essential for balanced lift, stable flight, and efficient performance.
₹18,000.00 (excluding GST)
DJI Mini 3 Pro RC1 refers to the smart controller (DJI RC) that is commonly bundled with the DJI Mini 3 Pro drone in some sales packages. This controller features a built-in display and doesn’t require a smartphone to view the live video feed or fly the drone — making it a more integrated and convenient control option than the basic phone-attach remotes.
₹4,200.00 (excluding GST)
This spare arm enables your DJI Mini 3 Pro to maintain its aerodynamic balance, flight stability, and overall performance, helping you get back in the air safely.the replacement right arm is engineered for precise fitment and long-lasting reliability. It’s an essential component for repairing drones that have sustained damage from crashes, hard landings, or structural stress.
₹4,200.00 (excluding GST)
The DJI Mini 3 Pro Real Arm (Right) is an OEM replacement spare part designed to restore the right arm assembly of the DJI Mini 3 Pro drone. This right arm securely supports the motor and propeller, ensuring stable lift, accurate thrust balance, and smooth maneuverability during flight.Manufactured with high-quality, lightweight, and durable materials, the replacement right arm is engineered for precise fitment and long-lasting reliability. It’s an essential component for repairing drones that have sustained damage from crashes, hard landings, or structural stress.
₹1,400.00 (excluding GST)
The DJI Mini 3 Pro Real Hinge (Right & Left) is an essential replacement part designed to restore the folding mechanism and structural stability of the DJI Mini 3 Pro drone. These hinges connect the rear arms to the main body, allowing smooth folding and unfolding while ensuring the arms remain securely locked during flight.
₹30,000.00 (excluding GST)
The DJI Mini 3 Pro Smart Remote RC2 is a premium remote controller engineered to provide precise, reliable, and professional-grade control for the DJI Mini 3 Pro drone. Featuring OcuSync 3.0 transmission technology, it delivers stable HD video feed with minimal latency and strong signal performance, even over long distances.