₹250.00 (excluding GST)
- The BX100 1-8S LiPo Battery Voltage Tester is a compact and essential diagnostic tool for anyone using lithium-based battery packs (LiPo, Li-Fe, Li-ion, LiMn, etc.) in RC models, drones, electric vehicles, and DIY battery builds. It’s designed to quickly check battery health and safety by measuring overall and individual cell voltages — helping you avoid damage caused by over-discharge or unbalanced cells.
₹5,000.00 (excluding GST)
The pump is integrated with both temperature and current protection. In an event when the pump is working abnormally, a sudden surge in current or temperature of more than 110 °C, the ESC will disconnect and restart. These protection functions effectively reduce the loss of overheating the water pump due to sudden failure.
₹30.00 (excluding GST)
The AMAS XT90 Male Connector with Housing (XT90H-M.G.Y) is a high-current power connector plug designed for use in LiPo battery systems, RC drones, FPV racing, multirotors, robotics, and other high-power applications. It delivers a secure, low-resistance connection capable of handling continuous currents of 90 A or more, making it ideal for heavy-duty electrical connections where performance and reliability are critical
₹7,000.00 (excluding GST)
This high-quality flight controller, designed specifically for Fixed Wing UAV enthusiasts, is compatible with Betaflight, INAV, and Ardupilot. This controller is tailored to meet the needs of hobbyists who are passionate about model aviation, providing a reliable and efficient solution for their aircraft.
₹19,780.00 (excluding GST)
The Bonka 10000 mAh 6S 35C Li-Po Battery Pack is a high-capacity, high-discharge rechargeable lithium-polymer battery designed for use in drones, UAVs, RC aircraft, multirotors, and other high-power devices that need sustained energy and strong current output. In a 6-cell (6S) configuration, this battery provides a nominal voltage of 22.2 V, making it suitable for 6S-capable ESCs and motors commonly found on larger drones and hobby rigs.
₹6,000.00 (excluding GST)
The Bonka 14.8 V 5200 mAh 35C 4S Li-Po Battery Pack is a high-performance rechargeable lithium polymer battery engineered for RC and UAV applications that demand strong current output and reliable power delivery. With its 4-cell (4S) configuration, this battery provides a nominal voltage of 14.8 V, which is ideal for a wide range of electric motors, electronic speed controllers (ESCs), and high-load devices.
₹7,200.00 (excluding GST)
Bonka lithium batteries are renowned for their superior quality and efficiency, tailored to meet the demands of high-performance FPV drones, RC cars, airplanes, helicopters, and multirotors. With a focus on exceptional quality, high discharge rates, ample capacities, precise pack assemblage, and cutting-edge manufacturing processes, Bonka has solidified its position as a top choice in the radio control industry.
Robu is proud to introduce a selection of Bonka lithium batteries, curated to suit a diverse range of applications including robotics, RC drones, and vehicles.
₹8,000.00 (excluding GST)
The power output is cut immediately when the ESC detects a signal loss of more than 1 second. When the signal returns, the corresponding power output will be restored.The ESC will immediately shut down the output and restart upon the current anomaly reaching close to 21A.
₹250.00 (excluding GST)
- The BX100 1-8S LiPo Battery Voltage Tester is a compact and essential diagnostic tool for anyone using lithium-based battery packs (LiPo, Li-Fe, Li-ion, LiMn, etc.) in RC models, drones, electric vehicles, and DIY battery builds. It’s designed to quickly check battery health and safety by measuring overall and individual cell voltages — helping you avoid damage caused by over-discharge or unbalanced cells.
₹80.00 (excluding GST)
A Control Horn (Big 4 Holes) is an essential linkage component used in RC aircraft, drones, and model control systems to connect the servo pushrod to control surfaces such as the aileron, elevator, or rudder. Designed with four large holes, it allows adjustable linkage positions for precise control and improved movement range. Made from durable and lightweight material, this control horn provides strong and reliable performance during flight operations. It ensures smooth transfer of servo motion to control surfaces, making it ideal for large RC planes, UAV projects, and heavy-duty control applications.
₹4,000.00 (excluding GST)
The 10 L drone tank is a high-capacity liquid reservoir designed specifically for agricultural spraying drones. It holds up to 10 litres of liquid — such as pesticides, herbicides, liquid fertilisers, or water — and delivers it through a drone’s spray system to cover fields efficiently and precisely.
₹4,500.00 (excluding GST)
The 16 L agriculture drone tank (sometimes called the cowl top tank) is a large-capacity liquid reservoir specifically designed for crop-spraying drones used in precision agriculture. It stores up to 16 litres of liquid such as pesticides, herbicides, fertilisers, or water, enabling wide-area spraying without frequent refills. These tanks are key components of agricultural UAV spray systems that improve efficiency and coverage over fields, orchards, and plantations.
₹43,000.00 (excluding GST)
The Cube Orange Flight Controller is a professional-grade autopilot and flight control system widely used in advanced multirotor drones, industrial UAVs, fixed-wing platforms, and VTOL aircraft. It serves as the “brain” of a drone by managing attitude control, navigation, stabilization, and mission execution — and supports fully autonomous missions when paired with compatible firmware such as PX4 or ArduPilot.
₹2,000.00 (excluding GST)
The Drone Bag (Customizable as Per Need) is a premium protective carrying solution designed to safely store, transport, and organize your drone and accessories according to your specific setup and requirements. Whether you’re flying hobby drones, professional photography UAVs, agricultural sprayers, or industrial platforms, this bag can be tailored in size, compartments, foam layout, and exterior options to match your gear perfectly.
₹1,000.00 (excluding GST)
Electronic Speed Controllers (ESCs) are crucial components in multirotor drones, RC planes, and other brushless-motor systems. They take throttle signals from the flight controller or receiver and control how fast the brushless motors spin by rapidly switching power to the motor phases.
₹38,000.00 (excluding GST)
10-liter tank capacity for liquid payload.Durable, lightweight engineering materials.Folding arms for easy transport.Simple to assemble and disassemble.High-strength, impact-resistant fuselage.Fully waterproof body for easy cleaning.Reinforced power plug for safety.Supports large 23-24-inch propellers.Cross-folding structure minimizes size.Optimized for agriculture and spraying.
₹520.00 (excluding GST)
An EFT Vertical Spraying System Pneumatic Kit is a set of tools and components used in a vertical spraying system that operates with air pressure (pneumatics).It helps deliver paint, coatings, or liquids in a controlled and consistent spray.The kit includes pneumatic fittings, valves, and hoses that connect to the spray gun and air supply.
₹7,000.00 (excluding GST)
10-liter tank capacity for liquid payload. Durable, lightweight engineering materials. Folding arms for easy transport. Simple to assemble and disassemble. High-strength, impact-resistant fuselage. Fully waterproof body for easy cleaning. Reinforced power plug for safety. Supports large 23-24-inch propellers. Cross-folding structure minimizes size. Optimized for agriculture and spraying.
₹10,000.00 (excluding GST)
The EFT 16 L Agriculture Drone Tank is a high-capacity liquid reservoir designed specifically for use with agricultural spraying drones based on the EFT E-series frames (like the EFT E616P hexacopter). This tank holds up to 16 litres of liquid pesticides, herbicides, fertilisers, or water, enabling efficient and wide-area crop spraying operations without frequent refills.
₹1,400.00 (excluding GST)
EMAX MT2213 Multirotor Motor is a high-performance brushless motor designed for drones, quadcopters, and other UAV applications. With a high thrust-to-weight ratio, it delivers efficient power for stable and responsive flight. Built with premium materials and precision engineering, the MT2213 motor ensures smooth operation, long service life, and excellent heat dissipation. Ideal for hobbyist and professional multirotor drones, it supports aerial photography, racing, and recreational flying. Lightweight and durable, this motor provides reliable thrust, optimal efficiency, and enhanced maneuverability, making it a trusted choice for building or upgrading multirotor UAVs.
₹2,000.00 (excluding GST)
Easy to assemble and disassemble.PCB for easy and neat wiringMade by advanced engineering material, super strong & smoothThe main glass fiber frame has good strength.The arm equips support ridges for better and faster forward flight.Features pre-threaded brass sleeves.Large mounting tabs for camera mounting.
₹7,500.00 (excluding GST)
The FARADIC 5200mAh 6S LiPo Battery is a high-performance power solution designed for drones and multicopters requiring extreme power and reliability. With a 6S configuration (22.2 V) and 5200mAh capacity, it provides long flight times and consistent energy output. Featuring a 120C burst discharge rating, this battery delivers instantaneous high-current power for heavy-lift drones, aggressive maneuvers, and payload-intensive flights. Built with premium LiPo cells and a durable casing, it ensures safety, longevity, and stable performance even under demanding conditions. Ideal for aerial photography, racing drones, industrial UAVs, and agricultural drones, it maximizes flight efficiency and reliability.
₹90.00 (excluding GST)
The Flat 20CM 22AWG Servo Lead Extension (Futaba Cable) is a high-quality extension cable designed to extend the reach of Futaba-compatible servo connections in RC models, drones, helicopters, cars, and robotics projects. With a **20 cm length
₹100.00 (excluding GST)
The Flat 40CM 22AWG Servo Lead Extension (Futaba) Cable is a high-quality extension cable designed to increase the reach of Futaba-compatible servo connections in drones, RC aircraft, helicopters, cars, robotics, and other electronic projects. With a length of 40 cm and 22 AWG wire gauge, it ensures reliable power delivery and consistent signal transmission for smooth servo operation.