₹3,969.00 (excluding GST)
The Bonka 22.2V 1300mAh 130C 6S FPV U2 Series Lithium Polymer Battery Pack is a high-performance battery designed for FPV (First Person View) applications. It has a voltage rating of 22.2V and a capacity of 1300mAh, providing ample power for extended flight times. With a discharge rate of 130C, it delivers exceptional performance and reliability. The 6S configuration ensures a stable and consistent power supply. It is specifically built for FPV drones and offers excellent performance in demanding flight conditions.
₹6,311.00 (excluding GST)
Bonka lithium batteries are renowned for their superior quality and efficiency, tailored to meet the demands of high-performance FPV drones, RC cars, airplanes, helicopters, and multirotors. With a focus on exceptional quality, high discharge rates, ample capacities, precise pack assemblage, and cutting-edge manufacturing processes, Bonka has solidified its position as a top choice in the radio control industry.Robu is proud to introduce a selection of Bonka lithium batteries, curated to suit a diverse range of applications including robotics, RC drones, and vehicles
₹6,668.00 (excluding GST)
The power output is cut immediately when the ESC detects a signal loss of more than 1 second. When the signal returns, the corresponding power output will be restored.The ESC will immediately shut down the output and restart upon the current anomaly reaching close to 21A.
₹187.00 (excluding GST)
- The BX100 1-8S LiPo Battery Voltage Tester is a compact and essential diagnostic tool for anyone using lithium-based battery packs (LiPo, Li-Fe, Li-ion, LiMn, etc.) in RC models, drones, electric vehicles, and DIY battery builds. It’s designed to quickly check battery health and safety by measuring overall and individual cell voltages — helping you avoid damage caused by over-discharge or unbalanced cells.
₹13,360.00 (excluding GST)
The Caddx Nebula Pro Vista Kit delivers a premium digital FPV experience. This combo features the lightweight Nebula Pro camera (6g) paired with the Caddx Vista VTX (27g total), offering crisp 720p/120fps video with ultra-low latency (12-28ms). Fully compatible with DJI FPV Goggles, it provides a stable HD video link up to 4km, ideal for racing and freestyle drones demanding superior clarity and responsiveness.
₹3,427.00 (excluding GST)
The Caddx Ratel 2 1/1.8"" 1200TVL 2.1mm Camera Black is a full weather camera that features a 1/1.18″ Starlight HDR sensor, NTSC & PAL switchable, super WDR, OSD metal case, and only weighs 3g
₹11,520.00 (excluding GST)
The iFlight Chimera 7 is a 7.5" long range frame designed to give maximum stability and flight time during your cinematic shoots. Fly smooth lines on the waterfront all the way to the Swiss Alps if you want! Made from a super-stiff carbon for minimum resonance and recommended 2806.5 motors for maximum 7.5" prop control.
₹3,350.00 (excluding GST)
CNHL Black Series V2.0 1500mAh 22.2V 6S 130C LiPo Battery with XT60 Plug is a strong fit for FPV pilots who want a fuller-feeling 6S 1500mAh XT60 battery for 5-inch freestyle drones, cinematic builds, and everyday high-performance flying.
₹80.00 (excluding GST)
A Control Horn (Big 4 Holes) is an essential linkage component used in RC aircraft, drones, and model control systems to connect the servo pushrod to control surfaces such as the aileron, elevator, or rudder. Designed with four large holes, it allows adjustable linkage positions for precise control and improved movement range. Made from durable and lightweight material, this control horn provides strong and reliable performance during flight operations. It ensures smooth transfer of servo motion to control surfaces, making it ideal for large RC planes, UAV projects, and heavy-duty control applications.
₹180.00 (excluding GST)
he nylon control horns are used to connect control surfaces such as rudders and ailerons to the airplane. The nylon control horns sandwich the control surface between the two horn bases and offer a no slip installation.
₹250.00 (excluding GST)
When building a larger RC plane with a wingspan over 1000mm, the aerodynamic forces on your control surfaces increase exponentially. Standard small horns found in cheap kits simply can't handle the torque generated during loops or sharp banking.
₹4,000.00 (excluding GST)
The 10 L drone tank is a high-capacity liquid reservoir designed specifically for agricultural spraying drones. It holds up to 10 litres of liquid — such as pesticides, herbicides, liquid fertilisers, or water — and delivers it through a drone’s spray system to cover fields efficiently and precisely.
₹5,000.00 (excluding GST)
The 16 L agriculture drone tank (sometimes called the cowl top tank) is a large-capacity liquid reservoir specifically designed for crop-spraying drones used in precision agriculture. It stores up to 16 litres of liquid such as pesticides, herbicides, fertilisers, or water, enabling wide-area spraying without frequent refills. These tanks are key components of agricultural UAV spray systems that improve efficiency and coverage over fields, orchards, and plantations.
₹62,719.00 (excluding GST)
The Cube Orange Flight Controller is a professional-grade autopilot and flight control system widely used in advanced multirotor drones, industrial UAVs, fixed-wing platforms, and VTOL aircraft. It serves as the “brain” of a drone by managing attitude control, navigation, stabilization, and mission execution — and supports fully autonomous missions when paired with compatible firmware such as PX4 or ArduPilot.
₹3,699.00 (excluding GST)
The Diatone Mamba F50 PRO 4-in-1 ESC provides great power and value in a 30×30 mounting pattern. Large solder pads give plenty of room for a clean build.
₹3,180.00 (excluding GST)
Diatone Mamba F722S is based on the latest STM32F722 processor with a processing frequency of 216MHz, which means complete freedom in flight without many technical limitations.
₹56,220.00 (excluding GST)
Elevate your drone flying experience with the DJI Goggles Integra. Featuring an integrated design for seamless wearability and extended battery life, these goggles offer comfort and convenience like never before. Enjoy stunning HD visuals on the Micro-OLED screens, with true-to-life colors and smooth motion thanks to the high refresh rate. With ultra-low latency video transmission and compatibility with various camera drones, including the DJI Mavic 3 Pro series, the DJI Goggles Integra delivers an immersive and exhilarating flight experience.
₹25,750.00 (excluding GST)
The DJI O3 Air Unit revolutionizes FPV experiences with cutting-edge video transmission technology, delivering high-definition video over long distances with low latency and boasting a 1/1.7-inch sensor, 155° super-wide FOV, and H.265 coding.
₹14,000.00 (excluding GST)
The DJI O4 Air Unit redefines video transmission with improved resolution, lower latency, and extended range. At just 8.2 grams, it integrates a 1/2-inch image sensor that records 4K/60fps video, delivering an ideal combination of performance and portability.
₹4,000.00 (excluding GST)
The Drone Bag (Customizable as Per Need) is a premium protective carrying solution designed to safely store, transport, and organize your drone and accessories according to your specific setup and requirements. Whether you’re flying hobby drones, professional photography UAVs, agricultural sprayers, or industrial platforms, this bag can be tailored in size, compartments, foam layout, and exterior options to match your gear perfectly.
Buy Now
Duratool D00678 48W 240V Temperature Controlled Soldering Station EU Plug
₹7,282.00 (excluding GST)
₹7,282.00 (excluding GST)
The Duratool D00678 temperature-controlled soldering station is designed for accurate, safe, and reliable electronic soldering applications. Powered by a 48W heater and operating from a 240V EU supply, it delivers fast heat-up and stable temperature performance from 150°C to 450°C. The low-voltage 24V soldering iron ensures operator safety while protecting sensitive components.
₹1,000.00 (excluding GST)
Electronic Speed Controllers (ESCs) are crucial components in multirotor drones, RC planes, and other brushless-motor systems. They take throttle signals from the flight controller or receiver and control how fast the brushless motors spin by rapidly switching power to the motor phases.
₹13,800.00 (excluding GST)
The Eachine EV800D 5.8G 40CH Diversity FPV Goggles offer an immersive and high-quality viewing experience for drone enthusiasts and FPV pilots. With a built-in 5.8G diversity receiver, these goggles ensure a stable and clear video signal, even in challenging RF environments. The 5-inch HD LCD screen provides crisp visuals, allowing users to fully immerse themselves in the FPV experience. Additionally, the goggles support diversity reception, enabling seamless switching between antennas to ensure the best possible signal strength.
₹2,375.00 (excluding GST)
This is EFT Arm Folding Assembly φ35/1pcs Compatible with E610P 35mm/30mm. This assembly seems to be a component designed for the folding mechanism in the drone arms of Effort Tech EFT series drones, particularly for models E610P and suitable for both 35mm and 30mm applications within the drone’s arm structure.