₹250.00 (excluding GST)
- The BX100 1-8S LiPo Battery Voltage Tester is a compact and essential diagnostic tool for anyone using lithium-based battery packs (LiPo, Li-Fe, Li-ion, LiMn, etc.) in RC models, drones, electric vehicles, and DIY battery builds. It’s designed to quickly check battery health and safety by measuring overall and individual cell voltages — helping you avoid damage caused by over-discharge or unbalanced cells.
₹600.00 (excluding GST)
Introducing the 9450 Self-Locking Propeller (CW + CCW) designed specifically for the Readytosky Motor and DJI Motor. These high-performance propellers are engineered to provide exceptional stability, efficiency, and durability, making them the perfect choice for aerial enthusiasts and professionals alike.
₹5,300.00 (excluding GST)
The pump is integrated with both temperature and current protection. In an event when the pump is working abnormally, a sudden surge in current or temperature of more than 110 °C, the ESC will disconnect and restart. These protection functions effectively reduce the loss of overheating the water pump due to sudden failure.
₹30.00 (excluding GST)
The AMAS XT90 Male Connector with Housing (XT90H-M.G.Y) is a high-current power connector plug designed for use in LiPo battery systems, RC drones, FPV racing, multirotors, robotics, and other high-power applications. It delivers a secure, low-resistance connection capable of handling continuous currents of 90 A or more, making it ideal for heavy-duty electrical connections where performance and reliability are critical
₹7,000.00 (excluding GST)
This high-quality flight controller, designed specifically for Fixed Wing UAV enthusiasts, is compatible with Betaflight, INAV, and Ardupilot. This controller is tailored to meet the needs of hobbyists who are passionate about model aviation, providing a reliable and efficient solution for their aircraft.
₹19,780.00 (excluding GST)
The Bonka 10000 mAh 6S 35C Li-Po Battery Pack is a high-capacity, high-discharge rechargeable lithium-polymer battery designed for use in drones, UAVs, RC aircraft, multirotors, and other high-power devices that need sustained energy and strong current output. In a 6-cell (6S) configuration, this battery provides a nominal voltage of 22.2 V, making it suitable for 6S-capable ESCs and motors commonly found on larger drones and hobby rigs.
₹6,000.00 (excluding GST)
The Bonka 14.8 V 5200 mAh 35C 4S Li-Po Battery Pack is a high-performance rechargeable lithium polymer battery engineered for RC and UAV applications that demand strong current output and reliable power delivery. With its 4-cell (4S) configuration, this battery provides a nominal voltage of 14.8 V, which is ideal for a wide range of electric motors, electronic speed controllers (ESCs), and high-load devices.
₹7,200.00 (excluding GST)
Bonka lithium batteries are renowned for their superior quality and efficiency, tailored to meet the demands of high-performance FPV drones, RC cars, airplanes, helicopters, and multirotors. With a focus on exceptional quality, high discharge rates, ample capacities, precise pack assemblage, and cutting-edge manufacturing processes, Bonka has solidified its position as a top choice in the radio control industry.
Robu is proud to introduce a selection of Bonka lithium batteries, curated to suit a diverse range of applications including robotics, RC drones, and vehicles.
₹8,000.00 (excluding GST)
The power output is cut immediately when the ESC detects a signal loss of more than 1 second. When the signal returns, the corresponding power output will be restored.The ESC will immediately shut down the output and restart upon the current anomaly reaching close to 21A.
₹250.00 (excluding GST)
- The BX100 1-8S LiPo Battery Voltage Tester is a compact and essential diagnostic tool for anyone using lithium-based battery packs (LiPo, Li-Fe, Li-ion, LiMn, etc.) in RC models, drones, electric vehicles, and DIY battery builds. It’s designed to quickly check battery health and safety by measuring overall and individual cell voltages — helping you avoid damage caused by over-discharge or unbalanced cells.
₹80.00 (excluding GST)
A Control Horn (Big 4 Holes) is an essential linkage component used in RC aircraft, drones, and model control systems to connect the servo pushrod to control surfaces such as the aileron, elevator, or rudder. Designed with four large holes, it allows adjustable linkage positions for precise control and improved movement range. Made from durable and lightweight material, this control horn provides strong and reliable performance during flight operations. It ensures smooth transfer of servo motion to control surfaces, making it ideal for large RC planes, UAV projects, and heavy-duty control applications.
₹150.00 (excluding GST)
he nylon control horns are used to connect control surfaces such as rudders and ailerons to the airplane. The nylon control horns sandwich the control surface between the two horn bases and offer a no slip installation.
₹250.00 (excluding GST)
When building a larger RC plane with a wingspan over 1000mm, the aerodynamic forces on your control surfaces increase exponentially. Standard small horns found in cheap kits simply can't handle the torque generated during loops or sharp banking.
₹4,000.00 (excluding GST)
The 10 L drone tank is a high-capacity liquid reservoir designed specifically for agricultural spraying drones. It holds up to 10 litres of liquid — such as pesticides, herbicides, liquid fertilisers, or water — and delivers it through a drone’s spray system to cover fields efficiently and precisely.
₹4,500.00 (excluding GST)
The 16 L agriculture drone tank (sometimes called the cowl top tank) is a large-capacity liquid reservoir specifically designed for crop-spraying drones used in precision agriculture. It stores up to 16 litres of liquid such as pesticides, herbicides, fertilisers, or water, enabling wide-area spraying without frequent refills. These tanks are key components of agricultural UAV spray systems that improve efficiency and coverage over fields, orchards, and plantations.
₹43,000.00 (excluding GST)
The Cube Orange Flight Controller is a professional-grade autopilot and flight control system widely used in advanced multirotor drones, industrial UAVs, fixed-wing platforms, and VTOL aircraft. It serves as the “brain” of a drone by managing attitude control, navigation, stabilization, and mission execution — and supports fully autonomous missions when paired with compatible firmware such as PX4 or ArduPilot.
₹3,100.00 (excluding GST)
The Drone Bag (Customizable as Per Need) is a premium protective carrying solution designed to safely store, transport, and organize your drone and accessories according to your specific setup and requirements. Whether you’re flying hobby drones, professional photography UAVs, agricultural sprayers, or industrial platforms, this bag can be tailored in size, compartments, foam layout, and exterior options to match your gear perfectly.
₹1,000.00 (excluding GST)
Electronic Speed Controllers (ESCs) are crucial components in multirotor drones, RC planes, and other brushless-motor systems. They take throttle signals from the flight controller or receiver and control how fast the brushless motors spin by rapidly switching power to the motor phases.
₹3,050.00 (excluding GST)
This is EFT Arm Folding Assembly φ35/1pcs Compatible with E610P 35mm/30mm. This assembly seems to be a component designed for the folding mechanism in the drone arms of Effort Tech EFT series drones, particularly for models E610P and suitable for both 35mm and 30mm applications within the drone’s arm structure.
₹14,700.00 (excluding GST)
Enhance your EFT E610P, E616P, or E620P agricultural drone with the Drone Body Only Six Axes—a high-quality repair part for robust performance.The Drone Body Only Six Axes (1pcs) is designed specifically for the EFT E610P, E616P, and E620P agricultural drones. This essential part offers a reliable solution for repairs or upgrades, ensuring your drone continues to operate at peak performance.
Buy Now
EFT 610p Drone Frame AL Extrusion Tube with Foulding fixture (per piece)
₹1,550.00 (excluding GST)
₹1,550.00 (excluding GST)
The SF610M Drone Frame AL Extrusion Tube with Foulding fixture. is a precision component designed for the SF610M drone, fully compatible with the EFT610M agricultural drone frame. Built with durability and reliability in mind, it supports field operations such as spraying and surveying. Its seamless integration ensures stability and long-term performance in demanding agricultural environments.
Buy Now
EFT 610p Drone Frame Carbon Tube Arm with folding fixture (per piece)
₹2,350.00 (excluding GST)
₹2,350.00 (excluding GST)
The SF610M Drone Frame Carbon Tube Arm with folding fixture. is a precision component designed for the SF610M drone, fully compatible with the EFT610M agricultural drone frame. Built with durability and reliability in mind, it supports field operations such as spraying and surveying. Its seamless integration ensures stability and long-term performance in demanding agricultural environments.
₹4,700.00 (excluding GST)
This is EFT Landing Gear Bar φ20*500/2pcs Compatible with E410P/E610P. It’s a critical part of a drone’s structure, contributing significantly to its stability and flight characteristics. Compatibility and proper installation of the arm assembly are essential for the drone’s overall performance and stability during flight.
Made of lightweight but durable materials & the design is engineered for strength while keeping the drone lightweight.
₹2,750.00 (excluding GST)
This is EFT Landing Gear Brace φ20*420/2pcs Compatible with E410P/E610P. It’s a critical part of a drone’s structure, contributing significantly to its stability and flight characteristics. Compatibility and proper installation of the arm assembly are essential for the drone’s overall performance and stability during flight.