Sort by
Show
12,000.00 (excluding GST)
Ground Support & Stability: Keeps the drone upright and stable on uneven terrain typical of farmland, fields, orchards, and unpaved surfaces. Agricultural environments are often rough and irregular — strong landing gear prevents tipping and gear damage.
96.00 (excluding GST)
The LiPo Battery Voltage Checker 1S-8S with Buzzer is a quality product available and a special design to measure and display the voltage of LiPo battery packs. This voltage checker can measure the voltage of the battery pack as well as the voltage of every single cell of the battery pack.
45.00 (excluding GST)
The LM2596S DC-DC 35V-35V Buck Converter Power Supply is a versatile and efficient module designed to convert high-voltage DC sources to lower, regulated voltages suitable for powering various electronic devices.
4,200.00 (excluding GST)
The Double AXII 2 takes the best parts of the original AXII 2 antenna and more than doubles the gain for improved range and performance! This is a high gain, omni-directional circular-polarized FPV antenna in a compact form factor.

M10 Screw

10.00 (excluding GST)
10.00 (excluding GST)
An M10 screw is a metric fastener with a nominal thread diameter of 10 millimeters. It is commonly used in heavy-duty applications such as machinery, structural assemblies, automotive components, and construction.

M4 Screw

8.00 (excluding GST)
8.00 (excluding GST)
An M4 screw is a metric fastener with a nominal thread diameter of 4 millimeters. It is commonly used in electronics, small machinery, appliances, and light mechanical assemblies.

M5 Screw

8.00 (excluding GST)
8.00 (excluding GST)
An M5 screw is a metric fastener with a nominal thread diameter of 5 millimeters. It is commonly used in electronics, machinery, furniture assembly, and light mechanical applications.

M6 Screw

8.00 (excluding GST)
8.00 (excluding GST)
An M6 screw is a metric fastener with a nominal thread diameter of 6 millimeters. It is commonly used in machinery, electronics, automotive parts, furniture assembly, and general mechanical applications.

M8 Screw

9.00 (excluding GST)
9.00 (excluding GST)
An M8 screw is a metric fastener with a nominal thread diameter of 8 millimeters. It is widely used in machinery, construction, automotive, and general assembly applications.  

Matek F722-SE

3,888.00 (excluding GST)
3,888.00 (excluding GST)
Experience unmatched control and performance with the BotStack F722 Flight Controller and 50A ESC Combo. Designed for drone enthusiasts, FPV racers, and freestyle pilots, this stack combines precision, power, and versatility in one compact package. Its innovative design ensures smooth handling, responsive maneuvers, and effortless connectivity with a wide range of drone components.

MATEK SAM-M10Q GNSS GPS MODULE

3,230.00 (excluding GST)
3,230.00 (excluding GST)
SAM-M10Q uses multi-constellation GNSS module powered by u-blox SAM-M10Q-00B.
247.00 (excluding GST)
TowerPro MG995 Plastic Gear Servo Motor (360° Rotation) – Standard QualityThe TowerPro MG995 Plastic Gear Servo Motor is a high-torque, standard-quality servo motor suitable for many applications including robotics, RC vehicles, automation, and DIY projects. This is a 360° rotation (continuous rotation) servo, ideal for applications where continuous movement is needed instead of fixed-angle positioning.

Mild Steel Washer M2

4.00 (excluding GST)
4.00 (excluding GST)
A Mild Steel Washer M2 is a small, flat, circular metal washer made from durable mild steel, designed for use with M2 (2 mm) screws and bolts. It is an essential fastening component used to improve the strength and reliability of mechanical joints. The washer is placed between the screw head or nut and the surface of the material, helping to distribute pressure evenly and prevent damage to softer surfaces. Mild steel washers are cost-effective, strong, and widely used in electronics, machinery, DIY projects, and precision assemblies. They may also come in plain or zinc-plated finishes for added corrosion resistance.

Mild Steel Washer M3

4.00 (excluding GST)
4.00 (excluding GST)
A Mild Steel (MS) Washer in size M3 is a small, flat, circular metal washer designed for use with M3 (3 mm) screws, bolts, or fasteners. It’s a general-purpose hardware component used in mechanical and assembly applications to improve the performance and reliability of screwed joints

MS Washer M2.5

4.00 (excluding GST)
4.00 (excluding GST)
An M2.5 washer is a small, flat, circular metal disc with a central hole designed to fit around an M2.5 metric screw or bolt (where the external thread diameter of the screw is 2.5 mm). It is a basic but essential hardware component used in mechanical assemblies to improve fastening performance and protect surfaces.
18.00 (excluding GST)
Manufacturer: onsemiPackage: SMA(DO-214AC)Current - Rectified: 2ADiode Configuration: -Reverse Leakage Current (Ir): 5uA@600VVoltage - DC Reverse(Vr): 600VVoltage - Forward(Vf@If): 1.45V@2A

Neo 7m

1,525.00 (excluding GST)
1,525.00 (excluding GST)
If you are wandering to navigate the distance with a drone then this GPS Module is needed for you. GPS drones are equipped with a GPS module that allows them to know their location relative to a network of orbiting satellites. Connecting to signals from these satellites allows the drone to perform functions such as position hold, autonomous flight, return to home, and waypoint navigation.

Neo M8N

2,419.00 (excluding GST)
2,419.00 (excluding GST)
This is a new generation NEO-M8N High Precision GPS Module with Built-in Compass for APM FC with onboard Compass, low power consumption, and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy, support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more Anti-jamming Active CW detection and removal. Extra onboard SAW band passes filter (NEO-M8N/Q). Data logger For position, velocity, and time (NEO-M8N). With a sticker, it is easy and quick to install.
1,519.00 (excluding GST)
Orange 14.8V 850mAh 25C 4S Lithium Polymer Battery Pack (LiPo) battery is known for performance, reliability, and price. It's no surprise to us that Orange Lithium polymer packs are the go-to pack for those in the know. The Orange batteries deliver the full rated capacity at a price everyone can afford. Orange 14.8V 850mAh 25C 4S Lithium Polymer Battery Pack (LiPo) batteries are equipped with heavy-duty discharge leads to minimize resistance and sustain high current loads. Orange batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold-plated connectors and JST-XH style balance connectors.
6,200.00 (excluding GST)
The ORANE 5200mAh 40C 3S LiPo Lithium Polymer Battery Pack is a high-performance rechargeable battery designed for RC drones, quadcopters, multirotors, helicopters, airplanes, and other high-power hobby applications. With a strong balance of capacity, discharge rate, and lightweight design, it delivers reliable power output and extended runtime for demanding flight operations.

Ovonic 4S 1550mAh

4,036.00 (excluding GST)
4,036.00 (excluding GST)
OVONIC 4S LiPo Battery 1550mAh 100C 14.8V with XT60 Plug is an excellent choice for 5-inch FPV racing drones, freestyle drones, cinewhoops, toothpick drones, and long-range drones. With a high 100C discharge rate, reasonable capacity (1550mAh), and a secure XT60 connector, this battery provides high power, reliability, and performance needed for demanding drone applications. Whether you're racing, performing freestyle tricks, or flying a long-range setup, OVONIC 4S LiPo battery delivers exceptional performance while maintaining a manageable weight for superior handling and agility.

PDB-XT60 with BEC 5V and 12V

365.00 (excluding GST)
365.00 (excluding GST)
Matek PDB-XT60 with BEC 5V and 12V Power Distribution Board have been engineered to provide the highest possible performance and reliability in a 36x50mm, 4 layer PCB. It comes with an XT60 for easy connection to LiPo batteries.
5,879.00 (excluding GST)
The most common question asked by our community is "what is flight controller" and the answer is here The flight controller (aka FC) is the brain of the Drone(Quadcopter). It's a circuit board with a range of sensors that detect movement of the drone, as well as user commands so Pixhawk 2.4.8 does. Using this data, it then controls the speed of the motors to make the craft move as instructed.
2,940.00 (excluding GST)
The EFT V-Shape Dual Nozzle is a specially designed dual-spray nozzle assembly for agricultural UAV (drone) crop spraying systems. It’s used to disperse liquid inputs like pesticides, herbicides, fertilizers, and other agrochemicals over fields with high precision and uniformity — helping farmers treat crops more efficiently than manual spraying.
Search products
Back to Top
Let's Chat